      
|
|
|
|
| Click Here For BMW/Mini Service |
|
| ONLINE SHOPPING |
|
 |
Differentials |
|
|
|
Repair Manuals |
|
|
|
Owners Manuals |
|
|
|
Wiring Diagrams |
|
|
|
New BMW Parts |
|
|
|
Used BMW Parts |
|
|
|
All Products |
|
|
|
Browse Store |
|
|
|
|
|
|
|
Technical Articles |
|
Customer Gallery |
E30 M3 CD Owners
Click HERE for Upgrade
and bug fix info.
|
Koala Motorsport Inc (440) 564 7574 |
| REMOVAL
OF E36 GLOVE BOX This procedure does not cover E36/5 or E36/7 models (ti and Z3) Remove the 2 screws retaining the lower panel to the glove box, there is no need to remove the panel. Open the glove box door and you will see 2 plugs matching your interior colour, remove these plugs and remove the screws behind them. Down by the hinges for the door are two more screws, these require a right angle, or very short screwdriver to remove. In each of the 2 air vents above the glove box door is another screw. You should have removed 6 screws. If you have a car with a passenger airbag, pry out the light inside the glove box and remove the 10 mm bolt located above the light. Pull the glove box towards you , gently as there are wires connected to it. As you gain clearance, unplug the interior light, and, if you have to remove the assembly from the car, remove the wiring and socket for the flashlight. When installing the glove box, make sure the correct screws are installed where the plastic caps are required. These screws differ from the rest by having a lip on the head, for the caps to hold onto. |
|
|||||
Koala Motorsport Inc
|
What's new this month...! What's new? More parts being added daily. Need something? Email the part number to us. |
This site is best viewed in 1024x768 or higher resolution